What's wrong with a toilet that isn't clogged but is slow to drain?
Release time:
2023-09-27
1, the toilet has not been cleaned for a long time, resulting in the accumulation of a lot of dirt on the inner wall of the toilet drain pipe, which affects the flushing speed of the toilet. We can use toilet bowl cleaner, toilet brush, etc. to brush the toilet clean. Or we will pour white vinegar, baking soda and other items into the toilet soak for a period of time, and then use the brush to scrub it clean.
2, the water tank water level is low, resulting in insufficient toilet flushing force, there will also be a slow water situation. We can open the lid of the tank, break the water inlet valve buckle, rotate the water inlet valve to the left to adjust its height and then tighten the water inlet valve and buckle buckle. Or we can put a bottle of water into the tank, can also improve the water level.
3, the drain valve failure caused by the toilet flush is not enough. We have to check the tank drain valve there is no failure, if the drain valve failure leads to low flush, we will replace the drain valve. If the drain valve drainage is not adjusted to lead to, we can move the yellow button of the drain valve up to improve drainage.
4, the toilet lid button screw rod length is short, will lead to the toilet drain valve button strength is not enough, the toilet flush less. We can take down the tank cover, loosen the screws at the screws will be screw rod lengthened and then tighten the screws.
5, the poor quality of the toilet itself, is also one of the reasons that lead to slow toilet water. If it is caused by this reason, you can consider replacing a high-quality toilet.
NEWS
How to replace a floor drain core
Want to replace the floor drain core, first need to find a way to take it out, some can be taken out directly, just need to take out its cover and filter - take out, and then in accordance with the direction of rotation to the left, you will be able to directly take out the floor drain core. Then choose the same type of floor drain core, according to the right direction to install in place.
2023-11-21
Causes of floor drain backflow
Floor drain backwater is generally caused by clogged pipes, you can use the pump unclogging method, first put the pump hose into the drain inside, and then seal the drain, and then pour enough water, and then pour the water at the same time and quickly to the drain inside the pump, so that you can unclog the water pipe. Or you can use baking soda to unclog, first baking soda and vinegar mix evenly poured into the floor drain, to be its chemical reaction with the blockage can be unclogged.
2023-09-27
How to deal with a backed up floor drain
First check to see if the floor drain is blocked, if it is blocked can be blocked to clean up the place, and then to the floor drain inside the water, wait until the height of almost the same time can be based on the storage of water to find the location of the water bend where.
2023-09-27
CONTACT
PHONES: +86 15868652222
E-MAILS: sales@tzbaolilai.com
ADDRESS: Jinqing Sanjin Industrial Zone, Luqiao, Taizhou City, Zhejiang Province.
©2022 Zhejiang baolilai sanitary ware technology Co.,Ltd. SEO Porwer by 300.cn business license
